\
big
detail1
detail1

Sensor Type Through Beam Reflection Diffuse Reflection
Type NPN output Cable CPA-TF15MN3 CPA-DF100N3 CPA-DF300N3 CPA-DF1MN3
NPN output Connector CPA-TF15MN3-A CPA-DF100N3-A CPA-DF300N3-A CPA-DF1MN3-A
PNP output Cable CPA-TF15MP3 CPA-DF100P3 CPA-DF300P3 CPA-DF1MP3
PNP output Connector CPA-TF15MP3-A CPA-DF100P3-A CPA-DF300P3-A CPA-DF1MP3-A
Detection Distance 15m 100mm 300mm 1m
Spot Diameter (Reference Value) --- 40×45mm 40×50mm 120×150mm
Standard Object Detection Opaque objects above φ 7mm White paper:300×300mm
Return Difference --- The detection distance-less than 20%
Direction Angle Minimum2° ---
Light Source (Wavelength) Red infrared Ray emitting diode(850nm)
Supply Voltage DC12~24V ripple (P-P) less than 10% (DC10~30V)
Consumed Current Below 40mA (Emitter below 25mA, Less than 25mA
Receiver below 15mA)
Control Output NPN/PNP (collector open-circuit output) load current below 100mA (residual voltage below 3V), load supply voltage less than 30V
Action Mode Dark ON / Light ON select by wire connection
Indicator Action indicator (orange)
Stable indicator (green)
Power indicator (green): through beam emitter only
Protection Circuit Power supply reverse connection protection, surge absorption, load short circuit protection
Response Time 0.5ms 1ms (0.5ms is upgrading)
Sensitivity Adjustment Single knob
Ambient Illumination (Receiver Side) Lighting collecting surface illumination incandescent lamp: below 3000lx, sunlight:  less than 10000lx
Ambient Temperature Range Working: -25 ~ 55℃/ Storing: -40 ~ 70℃(no freeze, no dew)
Ambient Humidity Range Working: 35~85%RH/ Storing: 35~95%RH (no dew)
Insulation Resistance Above 20MΩ(DC500VMeg-ohmmeter)
Withstand Voltage AC 1,000V 50/60Hz 1min between the whole charging part and the shell
Vibration (Durability) 10~55Hz up and down amplitude is 1.5mm, 2 hours in X, Y, Z directions
Impact (Durability) 300m/s 2 3 times in X,Y,Z directions
IP Grade IEC standard IP65(Note: no knob IP67)
Product Weight Cable About 94g About 50g
M12 Connector About 80g About 55g
Material Case ABS
Lens / Display Window PDM
Knob POM
Nut ABS
Accessory Instructions, M18 nuts (4) Instructions, M18 nuts (2)

Product Description







Company Information



 




FAQ


How and how long can I get a sample to check your quality? Can I expect to get the sample? 

After price confirmation, you can require for samples to check our quality. Then after you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-5 days. The samples will be sent to you via express and arrive in 3-5 workdays. You can use your own express account or prepay us if you do not have an account.

 

Can you do the design for us?

Yes. Send us high resolution images, your Logo and text and tell us how you would like to arrange them, We will send you finished files for confirmation.

 

What about the lead time for mass production?              

Honestly, it depends on the order quantity and the season you place the order. Normally we have enough stock about standard products, delivery can be made within 1~2 days once order confirmed, if our stock is not enough, production time is about 2~3 weeks.

  

Do you have inspection procedures for sensor?   

100% self-inspection before packing.

 

Can I have a visit to your factory before the order?  

Welcome! Our factory address: No. 376, Xunye Road, Sheshan Town, Songjiang District, Shanghai, China.